Switching to a digital shower system is life-changing. These systems provide better regulation of temperature, high water use, and a stylish look. Whether they are doing a renovation or considering a brand-new shower, those who want a digital shower system can do so easily with the right advice. In this blog, let us make things easier and provide a step-by-step guide on how to best install a Digital shower system in your home.
9” x 26" Digital LED Shower System (Wall Mounted) with built-in Bluetooth Speaker, 4 Functions
Why Choose a Digital Shower System?
Digital showers can be a good choice for a variety of reasons, including:
Precise temperature control
Digital showers mean you can select the water temperature at any given time with the use of buttons.
User-friendly
Digital showers come with interfaces that make use of showers a very easy thing to do.
Remote control
Most digital showers are operated through buttons on the shower head or control panel but some have a remote control or even a smartphone application.
Smart home integration
There are innovations of digital showers that are compatible with the smart home system like Amazon Alexa to control via voice commands.
Safety features
- Digital showers have other additional features that make them safer than other styles of showers.
- Due to their design, installation is simple and so is operation while their maintenance is equally uncomplicated.
- Digital showers are normally easy to install, and use, and also when it comes to possessing they are also not difficult to possess as well.
Quiet
Most digital showers are quiet, but digital showers with integral pumps are likely to generate noise.
Cascada Verona 16"x36" Brushed Nickel Music LED Digital Shower System - Cascada Showers
Tools and Materials You’ll Need
Before you start, gather these essential tools and materials:
- Screwdrivers (flathead and Phillips)
- Adjustable wrench
- Drill and drill bits
- Pipe wrench
- Plumber’s tape
- Digital shower system kit
- Measuring tape
- Safety goggles
Plan Your Installation
Check the Plumbing System:
Check to see that your home plumbing system can complement the digital shower system. Should your system employ a mixer, there is a need to check compatibility with your existing water heater.
Choose the Right Location:
Choose a wall where you or your washroom contractor will not need to run pipes very far to connect to the existing lines. The control unit should be easily accessible; the Led rain shower head should be positioned at the preferred height.
Prepare the Area
Shut Off the Water Supply
This process is to shut down the main water supply tanks to avoid water leakage. Turn the shower tap if there is any water still in it, you have to open it and let it drain out.
The shower fittings should be taken off
Then using a wrench slowly remove the old shower unit from the wall. The closeness of all connections to avoid the presence of debris.
Test the System
Turn On the Water Supply
Slowly open the main water valve and scan for any dripping. They understand when connections are tight as needed.
Power On the System
Use the touch control mechanism of the heater then set the required temperature of the heater. Exercise all the options that are embedded in the equipment; the spray modes and the presets.
Adjust Settings
Choose settings based on your convenience. Make sure the temperature of the water changes a little during use.
Tips for a Smooth Installation
- Read the Manual: Often it is necessary to perform independently the subsequent operations, the sequences of which are tightly connected with the fundamental recommendations of the manufacturer.
- Seek Professional Help: If you are in doubt as to what type of wiring or plumbing to use, contact a licensed contractor.
- Perform Regular Maintenance: LED waterfall Showerhead and change the software if it has any, so do the smart features if present in your system.
FAQ Section
Q. Is taking a shower using a digital shower a way of saving energy?Absolutely. They are intended to make the best use of water, which means they both save water and energy at the same time.
Q. Do I need to monitor the shower through a remote control?
A significant number of developed digital shower systems come with an App where users can control the systems remotely.
Q. Can I install a digital shower system myself?
In essence, it is possible to install a digital shower system without professional engineering knowledge in plumbing and electrical work. However, a professional’s appointment is advisable when installing complex structures.
Conclusion
Starling of digital shower system is one of the best investments you can make today to make your life more comfortable. If you’re reading this guide, then you’d find it easy to install and then have all the benefits of a modern bathroom. Much like any other project, a digital shower functionality can be made functional soon enough through the correct approach and a couple of tools among them being a couple of screws.