In terms of making improvements to your bathroom, there is nothing that can have the same great impact as a shower panel. Apart from providing your room with an additional contemporary look, High Sierra Spa Shower brings a whole new level of showering pleasure through numerous water options, such as rainfall showerhead and even handheld and massaging ones. Cascada Showers Pty Ltd deals with shower systems – LED shower systems, LED shower head, and other Shower products and accessories to make your bathroom a haven.
Why Choose a Shower Panel?
Now that we are going to learn how to install a shower panel let us first discuss why Shower Panel installation is a wise decision. If you're curious about the benefits of installing a shower panel, check out our detailed guide on the Top 5 Benefits of Installing a Shower Panel.
A Shower Panel offers:
- Multiple Water Settings: The outdoors lovers must also remember that at this area they will be able to have a shower using both rain shower, the handheld and the body spray jets.
- Sleek Design: Modernizes your bathroom in a blink of an eye.
- Easy Maintenance: In fact, most shower panels like our LED shower systems are fairly easy to clean and maintain.
Now, let’s move on to the installation process.
Tools and Materials You’ll Need
Before you begin, make sure you have the following tools and materials:
- Shower Panel (from Cascada Showers, of course!)
- Adjustable wrench
- Drill
- Wall anchors
- Screws
- Tape measure
- Pipe sealant tape
- Level
- Plumber’s tape
That is why, preparation of the necessary tools and equipment will facilitate the work of shower panel installation.
The Ultimate Procedure to Follow When Installing Shower Panels
1. Plan Your Installation
One cannot even begin any work without proper planning that is planned in advance. Select where you would like to fit the shower panel normally it has to be fitted on a flat surface on your shower. Make certain that the wall you choose can afford the load that the panel is going to exert on it. Take some time and think where your water source is and how it will reach this panel and hook to the panel.
Key Points to Consider
- The shower panel needs to be at a comfortable height for all users.
- Ensure the water supply lines are easily accessible for connection.
- Check for any structural issues behind the wall, such as plumbing pipes or electrical wiring.
2. Disconnection of the Water Supply
What you need is your bathroom flooding. When handling a shower fitting replacement project for example, ensure you switch of the water supply at the main valve before attempting to uninstall any of the existing shower fittings. It is important for eradicating risks of water damages throughout the installation process at this step.
3. The Next Step is to Take Away the Current Shower Fixture
If you are installing a panel in a bathroom that had a shower fixture before, there is always need to remove it. Remove the old showerhead: simply unscrew it and, when you’ll be forced to use an adjustable wrench (which will be explained a little further in this guide) to make it easier. Another important thing that should be done is to leave the place clean once the fixture is out, in preparation for new shower panel.
4. Measure and Mark
That should do it, now your wall is clean and dried; it is time to have the measurements done. With a tape measure and a level use those points where the shower panels are going to be fitted. Place a dot at points where you are going to screw the bolting brackets into this unit.
- Tip: Make sure you measure correctly so that you produce a panel that gives a straight and an aligned installation.
5. Drill holes for the mounting brackets
After that, with the help of your drill, it is high time to make holes which will be used to install the mounting brackets. When choosing a drill bit for drilling into your panel remember to choose one that matches the size of the screws and anchors that came with it.
6. Install the Mounting Brackets
Before, tightening the mounting brackets into the holes, first insert the wall anchors into them. These brackets are used to fix your shower panel in place and be certain to screw these brackets firmly for the stability of the shower panel. Level the brackets in its position for the wall to guarantee that it does not look slanted.
7. Turn the water Supply off
Finally, we approach the most crucial step in shower panel installation, which is the ability to combine the water supply. Many panels as well as most of those from Cascada Showers include flexible hoses that should be connected to your lines of water. To guarantee that there are no drips, wrap the threads with plumber’s tape.
- Tip: Screw the hot water line to the lower inlet on closure of the panel and hot water line to the upper inlet for cold water.
8. Mount the Shower Panel
Now that you have done the plumbing, you have to fix the panel onto the brackets that have been installed. Gently push the curtain above the showerhead and fit the shower panel into the mounted brackets. Often double check to make sure it not lose because next thing you know, the part has fallen off.
9. Test for Leaks
Before finalizing and tightening the nuts and bolts, open the water supply and see if there is any dripping. The panel of shower has three water functions: rainfall, handheld and body jets, turn all of them till you are sure they are working.
- If there’s any sign of leakage, shut off the supply of water and twist the joints adequately.
10. Final Adjustments
Once everything is in its proper function, the person can further fine tune the position of the shower panel if necessary. Check that it’s placed firmly also just in case wipe the surrounding region to eliminate any particles of the installation process.
Frequently Asked Questions
Q. How many hours does it take to fit a shower panel?
Usually the actual shower panel installation takes about one to two hours, but it depends on the degree of difficulty of the bathroom plumbing system and experience of the performer.
Q. Is it possible for me to self-install a shower panel for my shower?
Of course, some homeowners choose to install the shower panels by themselves. But if you prefer not to work with plumbing, it’s recommended to leave it to the experts.
Q. In turn, do I have to install separate plumbing for a shower panel?What makes most shower panels quite convenient is that they fit into your plumbing system without too many alterations. But first, check your panel’s requirement since it may differ from one to another.
Q. How tall should my shower panel be?Of course the height of your shower panel will depend with the size of the average person in your house. In most cases, the rainfall showerhead should be installed slightly above this range, from 6 to 7 feet from the floor.
Q. Is it necessary to shut the water supply when installing a shower panel system?Yes, is essential to shut off the water supply whenever you have to replace any other fixture or install new ones for the shower.
Conclusion
Buying a shower panel is one of the best ways to revamp your shower area thus making your bathroom experience better. If you can just follow these instructions well, your shower panel DIY is going to be a walk in the park, and as you perfectly see, there won’t be any leaks at all. Regardless of whether you want to complete the remodel yourself or contract the service of a contractor, you will have an attractive and efficient washroom addition to your home.
If you are interested in shower systems and accessories, then let Cascada Showers be the place you run to our LED shower systems, bathtubs and much more to add value to your bathroom designs. Ready to upgrade? Shop from our shower products today including the shower panels.